1, CCC, ISO9001, BV, GSMO , SASO , Standardization.
2, one year guarantee
3, 20 years factory
4, Customized designing
CARGO-HIGH SIDE TRAILER TECHNICAL SPECIFICATION
All dimension and components should comply with the standard specified by the Standardization & Metrology Organanization for GCC (GSMO) and Saudi Arabian Standard Organization (SASO)
Overall Length (mm)
Overall Width (mm)
Front wall Overall Height (mm)
Payload Capacity (kg)
Gross Vehicle Weight (kg)
IPE 470 Beam (pre-engineered) build up structural steel conforming with DIN ST52-3. All structure, chassis and suspension shall be guaranteed for five (5) years against crack.
All structure, chassis and suspension should be guaranteed for five (5) years against cracked.
Heavy duty axle, preferrably SAF brand made in Germany
3 X 9 - Air suspension
Every air bellow shall be provided with emergency shut-off valve to manually close the air supply of individual bellow in case of leak
90 mm air bellows shoe should be installed on all air bellows.
Front axle shall have lifting device preferrably with original SAF brand
Spring center = 1,300 mm ( between axle )
Each axle shall have 2 shock absorbers
To be fitted with hub-odometer
Air brake, dual circuit
Linkage-free parking brakes
WABCO LSV/RSV valves conforming with asuspension loads
The brake system shall have ABS control (Two axles2&3, indicating lights and fault indicator must be provided.)
Preferrably all brake valves and coupling head shall be made in Germany.
Best quality of brake hoses and clamps must be used
All brake lines shall be protected with high quality insulation hoses and attached to the chassis with insulated metallic clamp
Heavy duty air pressure gauges should be installed near (Service) palm coupling
Every union fitting shall be applied with loctite to ensure connection and prevent air leaks.
Cables & Harnesses
Electrical cable wirings shall be appropriately harnessed and protected with an appropriate size of protective insulation.
Cable harness shall be properly laid out and held with appropriate sizes of insulated metallic clamps
Fuses and Instrument Panels
The type of fuses shall be fast-acting and resettable
The instrument protective devices shall be appropriately coordinated for proper protection of the electrical system
The instrument panel shall be easily accessible, it should be secured and placed in a safe area in front of the trailer chassis
Trailer Exterior Lighting (Sizes & colors of exterior light shall conform with SASO and international standards)
Side marker lights - Total of 14 side marker lights, 7 on each side of the trailer, symmetrically placed to cover the total length of the trailer
Taillight clusters - Two sets on each side of the trailer's rear end. Each cluster includes; reflector red in color and the dimensions shall be 10cm x 12 cm) parking light, brake light, direction light, & reverse light and horn.
Rear plate lights - 2 pieces
Trailer Electric Coupling Connector
Heavy duty, all weather 7-pin connector, with flexible spiral conduit or multicore cable with heavy insulation
2" King pin mounted to the front reinforced subframe .
Support legs (Landing gear)
SAF/JOST brand (Germany) heavy duty telescopic type dual speed support legs. Suitable bracing with crank mechanism should be added to support the landing gear
Suspension ride height on 5th wheel (mm)
The mounting of top plate for each air bellow shall be measured in such a way that the floor height shall be level. Taking into consideration that the fifth wheel height is 1,400 mm
Tires and Rims
Single tire Super 385/65R (11.75x22.5) steel disc rims. (6+1) Michellin brand tires
Steel Checkered 3mm plate
The trailer shall be designed to carry a 40-foot container box and Two (2) 20-foot container box
The container twist lock shall be made of best quality lock
Each side shall have removable pillars with locks (60x80x4x1500mm) 10 pieces on each side
15 pieces of hooks for cargo belts shall also be provided on each side.
Trailer Front Wall
The front wall shall be 2 meters high and shall be provided with appropriate carrier for trailer accessories
The carrier shall be infront of the trailer wall . The carrier shall be equipped with step ladders on both sides
Side Pillars Carrier
Suitable carrier or tray with lockable door cover for keeping the removable side pillars shall be provided on the side of the trailer to storing the removable side pillars.
Twenty (20) pieces removable side pillars and Two (2) pieces ratchet type cargo belts (2,000 kg x 10,000 mm). Two (2) pices cargo chain which come along with type 3 tons.
Paints and Anti-corrosion
All beams,plates and structural frames shall be cleaned by sand blasting then treated with anti-rust primer before anti-corrosion paint or body coat will be applied.The trailer shall be guaranteed for five (5) years against corrosion.
Reinforced rear bumper with rubber dumper
Two (2) six (6)kg. ABC type fire extinguisher with holder
Spare tire carrier for 2 tires
Ice box and water plastic tank with dispenser
Driver tool box( food, etc…)
Two (2) pieces tire chokes.
Steel mudguard and tail lights grill
Plastic water tank with faucet-200 liters
Tool box with lock
The warranty from any manufacturing defect shall be applied to the trailer as a whole for a period of two years except for cracks which is five years.
Warranty Procedure Guidelines must be presented to SAPTCO by the vendor of the chosen entry.
The vendor shall handle the processing of the warranty repairs and shall be fully responsible in case of technical failures found during the operation of the trailer while the warranty is still in effect.
Suspensions and chassis structures must be free from fissure and deformity for five (5) years beginning from the receiving date of the trailer.
During the warranty period the vendor shall perform three maintenance services of the trailers for free, at an interval of 4 months for each maintenance starting from the delivery of the trailers. The vendor should take into consideration "low downtime" for servicing and repair of the trailers in their workshops.
During the initial operation of the trailers that are under warranty, epidemic defects such as frequently defective parts, system failure, etc... and predictive design failure as observed by SAPTCO to more than 5% of the total number of the delivered trailers shall be reviewed and subject for modification by the vendor. The correction shall be applied to all the delivered trailers and to the undelivered trailers as well.
Technical Assistance & Requirements
Prior to the delivery of trailers, the vendor must stock reasonable quantity of spare parts and accessories of the trailer or equivalent to 5% of the total spare part requirements, including the warranty parts, for the total quantity of trailers.
During the waranty period, the vendor shall have a "quick response team" ready for dispatch 24/7 to assist brokedown trailers at any point in Saudi Arabia.
The vendor shall conduct orientation training for trailer handling for the drivers upon delivery of the trailer. In addition, the vendor shall sponsor a comprehensive training programs for SAPTCO technical personnel and drivers that shall be conducted by the trailer builders, and shall be held in Saudi Arabia using the vendors training facilities.
Five (5) sets in CD form and printed copies of Technical Manuals and Maintenance Procedure Manuals written in Arabic and English must be provided to SAPTCO.
The vendor shall provide five (5) sets of hardcopy and compact disc (EPC) of the parts catalogues.
Shipment of Trailers
Schedule of Deliveries (The earliest delivery time that would be favorable to SAPTCO shall be given high consideration.)
Quantity of trailers to be delivered per delivery schedule ( To be specified )